JT-X
JT-X
JT-X
JT-X
JT-X
JT-X

JT-X

The JT-X truss series is an extra heavy-duty aluminium truss system designed for high-load, demanding applications in professional event structures. It has a 610 mm × 510 mm section with Ø50 mm main tubes (4 mm wall thickness) and Ø30 × 3 mm diagonal and brace tubes in EN AW-6082 T6 aluminium, and weighs approximately 16 kg/m.

The SG-3 precision conical connection system (60 mm) allows fast, accurate and secure assembly. A 4-side diagonal webbing configuration gives efficient load distribution and rigidity, supporting free spans of up to 24 m (80 ft) under suitable conditions.

Download JT-X product data sheet

Need help?

Need advice about one of our products or services? Find out contacting our Sales Team.

Contact us
German static reports DVS Zert EN 1090 EXC-3 certified
Technical Specifications – JT-X
Height610 mm
Width510 mm
Weight~16 kg/m
Main Tube50 x 4 mm
Braces30 x 3 mm
MaterialEN-AW-6082 T6
ConnectionSg3 (60 mm)
Max. clear span24 m

Important Notes

  • Load capacities shown are applicable only to the corresponding loading tables.
  • Load values are based on static loading conditions unless otherwise specified.
  • The published load data applies to single-span configurations with supports at both ends.
  • Multi-span systems, custom structures, or special configurations require project-specific structural calculations.
  • Self-weight of the truss has already been included in the published load calculations.
  • Load ratings are valid only when the truss is installed in the orientation illustrated in the loading tables.
  • Connection forces and bending moments at joints are considered within the specified loading data.
  • Truss systems can be assembled using different standard section lengths to achieve the required span.
  • All installations should be carried out by qualified professionals in accordance with applicable safety standards and local regulations.
  • Always inspect truss components before use and replace any damaged parts immediately.
  • Refer to the Installation & Assembly Manual before assembly, rigging, or loading the truss.
  • For complex structures or critical applications, consult a qualified structural engineer before installation.

Advantages – JT-X

  • 24 m Clear Span
  • Ø50 × 4 mm Main Tubes
  • SG-3 Precision Conical Connection
  • 4-Side Diagonal Webbing
  • Compatible with SST-38 Towers