JT-H2

JT-H2 is an upgraded Jumbo truss engineered for medium-load and medium-span applications, offering enhanced strength and reliability for frequent professional use. It has a 600 mm × 500 mm section with Ø50 mm main tubes and Ø30 × 3 mm diagonal and brace tubes in EN AW-6082 T6 aluminium, and weighs approximately 14 kg/m.

Its reinforced chord configuration, with 50 × 3 mm top chords and 50 × 4 mm bottom chords, improves load capacity and structural rigidity. The SG-2 precision conical connection system (50 mm) provides accurate alignment and efficient assembly, and a 3-side diagonal webbing configuration gives dependable load distribution.

Download JT-H2 product data sheet

Need help?

Need advice about one of our products or services? Find out contacting our Sales Team.

Contact us
German static reports DVS Zert EN 1090 EXC-3 certified
Technical Specifications – JT-H2
Height600 mm
Width500 mm
Weight~14 kg/m
Main Tube50 x 4/3 mm
Braces30 x 3 mm
MaterialEN-AW-6082 T6
ConnectionSg2 (50 mm)

Important Notes

  • Load capacities shown are applicable only to the corresponding loading tables.
  • Load values are based on static loading conditions unless otherwise specified.
  • The published load data applies to single-span configurations with supports at both ends.
  • Multi-span systems, custom structures, or special configurations require project-specific structural calculations.
  • Self-weight of the truss has already been included in the published load calculations.
  • Load ratings are valid only when the truss is installed in the orientation illustrated in the loading tables.
  • Connection forces and bending moments at joints are considered within the specified loading data.
  • Truss systems can be assembled using different standard section lengths to achieve the required span.
  • All installations should be carried out by qualified professionals in accordance with applicable safety standards and local regulations.
  • Always inspect truss components before use and replace any damaged parts immediately.
  • Refer to the Installation & Assembly Manual before assembly, rigging, or loading the truss.
  • For complex structures or critical applications, consult a qualified structural engineer before installation.

Advantages – JT-H2

  • Reinforced 50 × 4 mm Bottom Chords
  • SG-2 Precision Conical Connection
  • 3-Side Diagonal Webbing
  • Compatible with SST-38 Towers
  • Indoor and Outdoor Use